Product Description
Length
|
1420MM
|
Height
|
760MM
|
Width
|
1320MM
|
I. Preparation
Before using the remote control track mower, you need to do the following preparations:
1. check whether the mower battery is sufficient, if the power is insufficient, please charge it in time.
2. Check whether the mower track is intact, if it is broken or loose, please repair or replace it in time.
3. Make sure the mower blade is intact and sharp, if it is worn or damaged, please replace it in time.
4. Clean up the mowing area to make sure there are no obstacles such as debris, stones, etc., so as not to damage the machine or affect the mowing effect.
Second, the operation steps
After finishing the preparation work, you can start to operate the remote control track mower:
1. Turn on the power switch of the mower to make sure the machine is running normally.
2. Adjust the walking speed of the crawler and the rotating speed of the blade, and select the appropriate speed according to the actual situation. Generally speaking, high speed traveling is suitable for mowing operation in large area and flat land, and low speed traveling is suitable for small area, sloping land or areas with more obstacles. At the same time, according to the density and hardness of the lawn, it is also necessary to adjust the blade speed appropriately.
3. Operate the remote control to make the mower move forward according to the predetermined route. There is a control panel on the remote control, which can be used to control the mower's traveling direction, speed and blade switch etc. through buttons or rocker. During operation, pay attention to keep a safe distance to avoid accidental injury caused by the mower going out of control.
4. After completing the mowing operation, turn off the power switch of the mower and check whether there is any abnormality in the machine. If there is any abnormality, the parts should be repaired or replaced in time.
Audited Supplier 
){kind=link}
){kind=link}