This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

High Quality Mining Single Hydraulic Prop for Underground Coal Mining

Product Details
After-sales Service: 1 Year
Warranty: 1 Year
Model Item: Dw08-350/110X
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
  • High Quality Mining Single Hydraulic Prop for Underground Coal Mining
Find Similar Products
  • Overview
  • Product Description
  • Product Parameters
  • Company Profile
Overview

Basic Info.

Model NO.
DW08-350/110X
Max Height(mm)
800
Min.Height(mm)
490
Working Stroke(mm)
310
Rated Working Resistance Kn
350
Weight (Kg)
28
Rated Working Pressure MPa
39.7
Hydraulic Pump Pressure MPa
15-20
Setting Load Kn
132-176
Cylinder Dia. (mm)
110
Transport Package
Wooden Box or Ron
Specification
DW08-350/110X
Trademark
Mingko
Origin
Shandong
Production Capacity
100set/Month

Product Description

Underground DWX Single Hydraulic Mining Prop



Single Hydraulic Prop

Product Description

Single hydraulic prop is the mining supporting equipment, mainly used for blasting mining and advanced conventional working face back roof support as well as the comprehensive mechanized coal T-junction support.

DWX single hydraulic prop is a new generation of monomer support products, due to its large carrying capacity, the partial load ability, widely uses and so on, can be used in both thin coal seam and thick seam.
 

Product Parameters

Model Max.
Height
(mm)
Min
Height
(mm)
Operation
Stroke
(mm)
90 Cylinder Series

Resistance Weight
kg
(kN)
100 Cylinder Series

Resistance Weigh
kg
(kN)
110 Cylinder
Series

Resistance Weight
kg
(kN)
DWX45 4500 2480 2020 50 75 150 88 200 89.5
DWX40 4000 2220 1780 100 68 200 80 250 81
DWX35 3500 1960 1540 150 61 250 71 300 72.5
DWX30 3000 1700 1300 200 56 300 65 350 66.5
DWX25 2500 1430 1070 250 43 54 55.5
DWX20 2000 1150 850 39.5 45 46.5
DWX16 1600 920 680 33 38 39.5
DWX12 1200 700 500 27.5 30.5 32
DWXD8 800 490 310 22 24 25.5
DWXD6 630 400 230 20 21 22
1.No Arc Weld
The following problems may happen if the pillar uses arc weld:
First, it's difficult to ensure the weld quality, so it's common that leakage appears around the commissure; second the arc weld weakened the strength and reliability of the plunger. So the DWX pillar actually avoids roof caving accidents caused by weld fracture.

2.Seal-compensation and Seal-swelling
The sealed points of the prop which uses seal-compensation and seal-swelling technique can effectively compensate under the seal warning condition. And can contain the seal-compensation state while facing the back roof pressure or under pressure support.
On the other side, all the sealed points mentioned above are external, so if any leakage happens, it can be observed directly by eyes. Then we can infuse the infusion or replace it in time, to ensure the roof can be perfectly supported and cleanupempty-propping hazard.

3.The Position of Three-use Valve
The three use valve of DWX pillar is installed in the valve body, when the plunger rises the valve holds its position and when the DZ pillar rises, the valve will follow up, as well as the hand of the operator. However, for the thick seam mining, It's not just increases the operation difficulty but also the dangerous of the workers. So it's very likely to cause harm to the operators.While type DWX pillar can avoid the danger caused by the three use valve
Cost Saving and Safety
1.Security Benefits
By improving the safety performance of the pillar; the cost saved by less casualties' accident will be inestimable.
By the suspending plugging principle, suspension force is four fifths of the working resistance, and pillar stress is only one
fifth so the stability and security of pillar are improved, stability coefficient reached 5 and the safety coefficient reached 3.

2.Less Spare-parts Demand and Fewer Repairs
Taking a 100mm working face as an example, the DZ pillars will be easy to leak and bend. In order to maintain normal production, a certain number of reserves must be ensured. But for the DWX pillar, with its low damage rate and applicability, can certainly reduce the spare reserves quantity, so that save a lot of money.

3.Alternate the Emulsion with Water as Working Medium

Company Profile

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier